Debian下shadowsocks-libev一键安装脚本

技术 秋水逸冰 680783浏览 514评论

本脚本适用环境:
系统支持:Debian/Ubuntu
内存要求:≥128M
日期:2018 年 06 月 01 日

关于本脚本:
Debian 或 Ubuntu 下一键安装 libev 版的 Shadowsocks 最新版本。该版本的特点是内存占用小(600k左右),使用 libev 和 C 编写,低 CPU 消耗,甚至可以安装在基于 OpenWRT 的路由器上。
友情提示:如果你有问题,请先参考这篇《Shadowsocks Troubleshooting》后再问。

默认配置:
服务器端口:自己设定(如不设定,默认从 9000-19999 之间随机生成)
密码:自己设定(如不设定,默认为 teddysun.com)
加密方式:自己设定(如不设定,默认为 aes-256-gcm)

客户端下载:
https://github.com/shadowsocks/shadowsocks-windows/releases

使用方法:
使用root用户登录,运行以下命令:

wget --no-check-certificate -O shadowsocks-libev-debian.sh https://raw.githubusercontent.com/teddysun/shadowsocks_install/master/shadowsocks-libev-debian.sh
chmod +x shadowsocks-libev-debian.sh
./shadowsocks-libev-debian.sh 2>&1 | tee shadowsocks-libev-debian.log

安装完成后,脚本提示如下:

Congratulations, Shadowsocks-libev server install completed!
Your Server IP        :your_server_ip
Your Server Port      :your_server_port
Your Password         :your_password
Your Encryption Method:your_encryption_method

Welcome to visit:https://teddysun.com/358.html
Enjoy it!

卸载方法:
使用 root 用户登录,运行以下命令:

./shadowsocks-libev-debian.sh uninstall

其他事项:
客户端配置的参考链接:https://teddysun.com/339.html
本脚本安装完成后,已将 Shadowsocks-libev 加入开机自启动。

使用命令:
启动:/etc/init.d/shadowsocks start
停止:/etc/init.d/shadowsocks stop
重启:/etc/init.d/shadowsocks restart
查看状态:/etc/init.d/shadowsocks status

更多版本 Shadowsocks 服务端一键安装脚本:
ShadowsocksR 版一键安装脚本(CentOS,Debian,Ubuntu)
Shadowsocks Python 版一键安装脚本(CentOS,Debian,Ubuntu)
CentOS 下 Shadowsocks-libev 一键安装脚本
Shadowsocks-go 一键安装脚本(CentOS,Debian,Ubuntu)
Shadowsocks 一键安装脚本(四合一)

更新日志

2018 年 06 月 01 日:
1、新增:配置文件新增 fast_open 字段,并根据系统的内核版本,判断大于 3.7.0 时启用,否则不启用;
2、修正:在使用 /etc/init.d/shadowsocks restart 命令重启服务端时,偶尔出现的 “bind: Address already in use” 问题;
3、修正:移除配置文件中的 local_address 字段;
4、修改:不再默认使用 root 用户启动,改为使用 nobody 用户启动服务端 ss-server;
5、升级:mbedtls 到版本 2.9.0;
6、修改:启动脚本中的 -u 参数(即同时启用 TCP 和 UDP 模式),改到配置文件里配置为 “mode”: “tcp_and_udp”;
7、修改:配置文件的内置 NameServers 为 8.8.8.8,默认是从 /etc/resolv.conf 中取得。

2018 年 02 月 07 日:
1、修改:将默认端口从 8989 改为从 9000-19999 之间随机生成。

2017 年 09 月 16 日:
1、修正:Shadowsocks-libev 版 v3.1.0 使用 libc-ares 替换 libudns 依赖包,解决了依赖问题;
2、升级:mbedtls 到版本 2.6.0。

2017 年 07 月 22 日:
1、修正:默认加密方式从 aes-256-cfb 改为 aes-256-gcm(官方原版客户端支持该加密方式);
2、新增:安装时可选 16 种加密方式的其中之一。如下所示:

aes-256-gcm
aes-192-gcm
aes-128-gcm
aes-256-ctr
aes-192-ctr
aes-128-ctr
aes-256-cfb
aes-192-cfb
aes-128-cfb
camellia-128-cfb
camellia-192-cfb
camellia-256-cfb
chacha20-ietf-poly1305
chacha20-ietf
chacha20
rc4-md5

2017 年 02 月 24 日:
1、恢复: 通过 Github API 自动获取 Shadowsocks-libev 的最新 release 版本的功能(v3.0.3)。

2017 年 02 月 13 日:
1、更新:升级版本到 3.0.2。
2、修复:在 Debian 7 下默认没有 libudns-dev 依赖包的问题。

2017 年 02 月 12 日:
1、更新:升级版本到 3.0.1(请下载最新的脚本来安装)。

2016 年 11 月 05 日:
1、新增:判断是否已安装,若已安装,则获取版本号与最新版比较,然后可以升级覆盖安装;
2、修正:未安装时获取最新版本号的问题。

2016 年 09 月 23 日:
1、修正:偶尔自动获取版本号失败的问题;
2、新增:自动判断如果 VPS 存在 IPv6 地址,则在配置文件里添加监听 IPv6 地址。

2016 年 09 月 17 日:
1、重构代码,自动获取 Github 上最新版来安装,不再手动修改版本号;
2、自动检测本机是否已经安装,若已安装则正常退出(若要安装新版,则需先卸载);
3、改为下载 tar.gz 包来安装,不用依赖 unzip 命令。

2016 年 09 月 12 日:
1、更新:升级版本到 2.5.2。

2016 年 09 月 11 日:
1、更新:升级版本到 2.5.1。

2016 年 08 月 29 日:
1、更新:升级版本到 2.5.0;
2、修正:由于安装时文件名的更新,卸载时文件名改为一致。

2016 年 07 月 14 日:
1、更新:升级版本到 2.4.7。

2016 年 07 月 05 日:
1、修正:新增的依赖 xmlto、asciidoc;
2、修正:由于安装时文件名的更新,卸载时文件名改为一致。

2016 年 05 月 12 日:
1、修正:Shadowsocks 服务改为强制默认开机启动。

2015 年 08 月 01 日:
1、新增:自定义服务器端口功能(如不设定,默认端口为 8989)。

2015 年 04 月 30 日:
1、修改配置文件 /etc/shadowsocks-libev/config.json 同时启用 IPv4 与 IPv6 支持:

{
    "server":["[::0]","0.0.0.0"],
    "server_port":your_server_port,
    "local_address":"127.0.0.1",
    "local_port":1080,
    "password":"your_password",
    "timeout":600,
    "method":"aes-256-cfb"
}

2、Shadowsocks libev 版不能通过修改配置文件来多端口(只能开启多进程),如果你需要多端口请安装 Python 或 Go 版;

2015 年 03 月 09 日:
1、新增:启动脚本/etc/init.d/shadowsocks,使用更简单。
2、修正:优化安装过程。

2014 年 10 月 31 日:
1、修正:写入自启动命令到 /etc/rc.local 中的错误。

特别说明:
已安装旧版本的 Shadowsocks 需要升级的话,需下载本脚本的最新版,直接运行即可自动升级

./shadowsocks-libev-debian.sh

参考链接:
https://github.com/shadowsocks/shadowsocks-libev

转载请注明:秋水逸冰 » Debian下shadowsocks-libev一键安装脚本

发表我的评论
取消评论

请输入正确答案后提交评论 *超出时限。 请再次填写验证码。

表情

Hi,您需要填写昵称和邮箱!

  • 昵称 (必填)
  • 邮箱 (必填)
  • 网址

网友最新评论 (514)

  1. debian8 ss_local-aead.o: In function `aead_chunk_encrypt': /root/shadowsocks-libev-3.2.0/src/aead.c:472: undefined reference to `sodium_increment' /root/shadowsocks-libev-3.2.0/src/aead.c:482: undefined reference to `sodium_increment' ss_local-aead.o: In function `aead_chunk_decrypt': /root/shadowsocks-libev-3.2.0/src/aead.c:566: undefined reference to `sodium_increment' /root/shadowsocks-libev-3.2.0/src/aead.c:574: undefined reference to `sodium_increment' ss_local-stream.o: In function `crypto_stream_xor_ic': /root/shadowsocks-libev-3.2.0/src/stream.c:165: undefined reference to `crypto_stream_chacha20_ietf_xor_ic' collect2: error: ld returned 1 exit status Makefile:689: recipe for target 'ss-local' failed make[2]: *** [ss-local] Error 1 make[2]: Leaving directory '/root/shadowsocks-libev-3.2.0/src' Makefile:480: recipe for target 'all-recursive' failed make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory '/root/shadowsocks-libev-3.2.0' Makefile:389: recipe for target 'all' failed make: *** [all] Error 2 [Error] Shadowsocks-libev install failed. please visit https://teddysun.com/358.html and contact.
    shira6年前(2018-10-23)回复
  2. SS装好了用了一段时间之后,如何查看连接信息?
    Hola6年前(2018-10-13)回复
  3. 楼主可以开通比特币或门罗币捐助地址,:)
    well1886年前(2018-10-01)回复
  4. 秋水大佬,这个脚本能不能运行在arm处理器上
    ADE6年前(2018-09-27)回复
  5. 博主的网站似乎被墙了,可否换个IP?
    hallo6年前(2018-09-08)回复
    • 换 IP 无用。因为被墙的方式是 DNS 污染。
      秋水逸冰6年前(2018-09-23)回复
  6. 谢谢你
    芳朗6年前(2018-07-29)回复
  7. 大神,新版的SS装了后硬盘占用一路飙升,不知道是什么原因?
    醉梦清风6年前(2018-07-23)回复
    • 因为启用了日志的缘故。 一般位于 /var/log/ 下,看看哪个文件最大,就清除该文件即可。
      秋水逸冰6年前(2018-07-23)回复
  8. 大神,最近VPS硬盘总是占用很多,然后看了下显示如下: root@debian:~# df -h Filesystem Size Used Avail Use% Mounted on udev 244M 0 244M 0% /dev tmpfs 51M 7.1M 44M 14% /run /dev/sda2 9.6G 5.0G 4.1G 56% / tmpfs 255M 0 255M 0% /dev/shm tmpfs 5.0M 0 5.0M 0% /run/lock tmpfs 255M 0 255M 0% /sys/fs/cgroup /dev/sda1 268M 36M 219M 14% /boot tmpfs 51M 0 51M 0% /run/user/0 通过WinSCP连接也找不到这个sda1文件夹,请问这是什么情况?
    醉梦清风6年前(2018-07-19)回复
  9. 大神,发现你这个网站也被墙了啊!!!神啊!!
    醉梦清风6年前(2018-07-16)回复
  10. 秋水兄,请问如何升级脚本到您发布的最新版本呢?谢谢解疑!
    zoo146年前(2018-07-08)回复
  11. 大佬,能不能吧obfs一并写入ss-libev一键脚本,拜谢。
    donoto6年前(2018-07-02)回复
  12. 好像脚本安装的3.2.0 不能连接,3.1.3正常
    moeany6年前(2018-05-31)回复
  13. ss-libev版能不能log连接信息?试了/etc/init.d/shadowsocks-libev start -v >> /var/log/sslog,只有启动、结束这种信息。有方法log通过ss访问网站的信息吗?
    mk6年前(2018-05-30)回复
  14. 安装成功,但如何安装多用户的Ss呢。求解,谢谢
    鞋姐姐6年前(2018-05-18)回复
  15. 有没有适合centos5 安装的教材
    116年前(2018-04-11)回复