Shadowsocks 一键安装脚本(四合一)

技术 秋水逸冰 3395548浏览 1374评论

本脚本适用环境

系统支持:CentOS 6+,Debian 7+,Ubuntu 12+
内存要求:≥128M
日期  :2019 年 01 月 11 日

关于本脚本

1、一键安装 Shadowsocks-Python, ShadowsocksR, Shadowsocks-Go, Shadowsocks-libev 版(四选一)服务端;
2、各版本的启动脚本及配置文件名不再重合;
3、每次运行可安装一种版本;
4、支持以多次运行来安装多个版本,且各个版本可以共存(注意端口号需设成不同);
5、若已安装多个版本,则卸载时也需多次运行(每次卸载一种);

友情提示:如果你有问题,请先阅读这篇《Shadowsocks Troubleshooting》之后再询问。

默认配置

服务器端口:自己设定(如不设定,默认从 9000-19999 之间随机生成)
密码:自己设定(如不设定,默认为 teddysun.com)
加密方式:自己设定(如不设定,Python 和 libev 版默认为 aes-256-gcm,R 和 Go 版默认为 aes-256-cfb)
协议(protocol):自己设定(如不设定,默认为 origin)(仅限 ShadowsocksR 版)
混淆(obfs):自己设定(如不设定,默认为 plain)(仅限 ShadowsocksR 版)
备注:脚本默认创建单用户配置文件,如需配置多用户,请手动修改相应的配置文件后重启即可。

客户端下载

常规版 Windows 客户端
https://github.com/shadowsocks/shadowsocks-windows/releases

ShadowsocksR 版 Windows 客户端
https://github.com/shadowsocksrr/shadowsocksr-csharp/releases

使用方法

使用root用户登录,运行以下命令:

wget --no-check-certificate -O shadowsocks-all.sh https://raw.githubusercontent.com/teddysun/shadowsocks_install/master/shadowsocks-all.sh
chmod +x shadowsocks-all.sh
./shadowsocks-all.sh 2>&1 | tee shadowsocks-all.log

安装完成后,脚本提示如下

Congratulations, your_shadowsocks_version install completed!
Your Server IP        :your_server_ip
Your Server Port      :your_server_port
Your Password         :your_password
Your Encryption Method:your_encryption_method

Your QR Code: (For Shadowsocks Windows, OSX, Android and iOS clients)
 ss://your_encryption_method:your_password@your_server_ip:your_server_port
Your QR Code has been saved as a PNG file path:
 your_path.png

Welcome to visit:https://teddysun.com/486.html
Enjoy it!

卸载方法

若已安装多个版本,则卸载时也需多次运行(每次卸载一种)

使用root用户登录,运行以下命令:

./shadowsocks-all.sh uninstall

启动脚本

启动脚本后面的参数含义,从左至右依次为:启动,停止,重启,查看状态。

Shadowsocks-Python 版:
/etc/init.d/shadowsocks-python start | stop | restart | status

ShadowsocksR 版:
/etc/init.d/shadowsocks-r start | stop | restart | status

Shadowsocks-Go 版:
/etc/init.d/shadowsocks-go start | stop | restart | status

Shadowsocks-libev 版:
/etc/init.d/shadowsocks-libev start | stop | restart | status

各版本默认配置文件

Shadowsocks-Python 版:
/etc/shadowsocks-python/config.json

ShadowsocksR 版:
/etc/shadowsocks-r/config.json

Shadowsocks-Go 版:
/etc/shadowsocks-go/config.json

Shadowsocks-libev 版:
/etc/shadowsocks-libev/config.json

更新日志

2019 年 01 月 11 日:
1、升级:libsodium 到最新版本 1.0.17;
2、升级:mbedtls 到最新版本 2.16.0;

2018 年 11 月 05 日:
1、升级:使用 Github 上最新代码编译出 Go 版二进制可执行文件,版本号 1.2.2。

2018 年 06 月 01 日:
1、修正:在启用了插件 simple-obfs 的情况下,libev 版启动失败的问题;
2、修正:在使用 /etc/init.d/shadowsocks-libev restart 命令重启 libev 版服务端时,偶尔出现的 “bind: Address already in use” 问题;
3、修正:移除 libev 版配置文件中的 local_address 字段;
4、修改:不再默认使用 root 用户启动,改为使用 nobody 用户启动 libev 版服务端 ss-server;
5、升级:mbedtls 到版本 2.9.0;
6、修改:libev 版启动脚本中的 -u 参数(即同时启用 TCP 和 UDP 模式),改到配置文件里配置为 “mode”: “tcp_and_udp”;
7、修改:libev 版配置文件的内置 NameServers 为 8.8.8.8,默认是从 /etc/resolv.conf 中取得。

2018 年 02 月 07 日:
1、修改:将默认端口从 8989 改为从 9000-19999 之间随机生成。

2018 年 02 月 06 日:
1、修改:ShadowsocksR 版为 ShadowsocksRR 最新版;
2、新增:ShadowsocksR 版的协议(protocol)增加了 4 个,分别为:

auth_chain_c
auth_chain_d
auth_chain_e
auth_chain_f

2017 年 12 月 29 日:
1、升级:libsodium 到 1.0.16。

2017 年 11 月 25 日:
1、如果 Linux 内核版本大于 3.7.0,则配置文件默认支持 TCP fast open;
2、新增:libev 版启动时支持 verbose mode,也就是默认写 log 到 /var/log/messages 方便查看。

2017 年 11 月 12 日:
1、新增生成 ss:// 或 ssr:// 链接,以及其二维码图片。
※ 脚本会根据当前安装的版本以及输入的各项配置,自动生成 ss:// 或 ssr:// 的链接并在安装成功后显示,直接复制即可被客户端识别。同时生成其二维码图片,并保存在当前目录下,下载后用看图软件打开,也能被客户端识别。

复制二维码链接后 Shadowsocks 客户端识别示例:

复制二维码链接后 ShadowsocksR 客户端识别示例:

二维码(QR Code)参考链接:
https://github.com/shadowsocks/shadowsocks/wiki/Generate-QR-Code-for-Android-or-iOS-Clients
https://github.com/shadowsocksr-backup/shadowsocks-rss/wiki/SSR-QRcode-scheme

2017 年 10 月 22 日:
1、升级:libsodium 到 1.0.15。

2017 年 10 月 14 日:
1、新增:在安装 Shadowsocks-libev 版时可选安装 simple-obfs 服务端。
※ 脚本通过判断 autoconf 版本是否大于或等于 2.67 来一键安装 simple-obfs 服务端。并且,支持在安装过程中选择 obfs 为 http 或 tls。
※ 使用方法参考:https://teddysun.com/511.html

2017 年 09 月 16 日:
1、修正:Shadowsocks-libev 版 v3.1.0 使用 libc-ares 替换 libudns 依赖包,解决了依赖问题;
2、升级:mbedtls 到版本 2.6.0。

2017 年 07 月 27 日:
1、新增:ShadowsocksR 版可选协议(protocol)auth_chain_b 。使用该协议需更新到最新(4.7.0) ShadowsocksR 版客户端
2、修改:更新 ShadowsocksR 源码下载地址。

2017 年 07 月 23 日:
1、修正:卸载时可自行选择某个版本卸载,若该版本不存在则报错退出。

2017 年 07 月 22 日:
1、修正:默认加密方式从 aes-256-cfb 改为 aes-256-gcm(Python 和 libev 版);
2、新增:安装时可选 16 种加密方式的其中之一(Python 和 libev 版)。如下所示:

aes-256-gcm
aes-192-gcm
aes-128-gcm
aes-256-ctr
aes-192-ctr
aes-128-ctr
aes-256-cfb
aes-192-cfb
aes-128-cfb
camellia-128-cfb
camellia-192-cfb
camellia-256-cfb
chacha20-ietf-poly1305
chacha20-ietf
chacha20
rc4-md5

3、新增:安装时可选 9 种加密方式的其中之一(Go 版)。如下所示:

aes-256-cfb
aes-192-cfb
aes-128-cfb
aes-256-ctr
aes-192-ctr
aes-128-ctr
chacha20-ietf
chacha20
rc4-md5

4、新增:安装时可选 15 种加密方式的其中之一(none 是不加密,ShadowsocksR 版)。如下所示:

none
aes-256-cfb
aes-192-cfb
aes-128-cfb
aes-256-cfb8
aes-192-cfb8
aes-128-cfb8
aes-256-ctr
aes-192-ctr
aes-128-ctr
chacha20-ietf
chacha20
salsa20
xchacha20
xsalsa20
rc4-md5

5、新增:安装时可选 7 种协议(protocol)的其中之一(仅限 ShadowsocksR 版)。如下所示:

origin
verify_deflate
auth_sha1_v4
auth_sha1_v4_compatible
auth_aes128_md5
auth_aes128_sha1
auth_chain_a
auth_chain_b

6、新增:安装时可选 9 种混淆(obfs)的其中之一(仅限 ShadowsocksR 版)。如下所示:

plain
http_simple
http_simple_compatible
http_post
http_post_compatible
tls1.2_ticket_auth
tls1.2_ticket_auth_compatible
tls1.2_ticket_fastauth
tls1.2_ticket_fastauth_compatible

2017 年 02 月 24 日:
1、恢复: 通过 Github API 自动获取 Shadowsocks-libev 的最新 release 版本的功能(v3.0.3)。

2017 年 02 月 13 日:
1、升级: Shadowsocks-libev 版到版本 3.0.2;
2、升级: Shadowsocks-go 版到版本 1.2.1(基于 Github 最新代码,用 go 1.8 编译完成的 x86 和 x86_64 二进制文件);
3、修复:在 Debian 7 下默认没有 libudns-dev 依赖包的问题。

2017 年 02 月 12 日:
1、升级: Shadowsocks-libev 版到版本 3.0.1。

2017 年 01 月 27 日:
1、升级: Shadowsocks-go 版到版本 1.2.1 (仅适用于 x86_64 系统)

更多单版本 Shadowsocks 服务端一键安装脚本

Shadowsocks Python 版一键安装脚本(CentOS,Debian,Ubuntu)
ShadowsocksR 版一键安装脚本(CentOS,Debian,Ubuntu)
CentOS 下 Shadowsocks-libev 一键安装脚本
Debian 下 Shadowsocks-libev 一键安装脚本
Shadowsocks-go 一键安装脚本(CentOS,Debian,Ubuntu)

注意:以上单版本不可与该四合一版本混用。

转载请注明:秋水逸冰 » Shadowsocks 一键安装脚本(四合一)

发表我的评论
取消评论

请输入正确答案后提交评论 *超出时限。 请再次填写验证码。

表情

Hi,您需要填写昵称和邮箱!

  • 昵称 (必填)
  • 邮箱 (必填)
  • 网址

网友最新评论 (1374)

  1. 楼主你好,请问SSR在多IP情况下,如何开启附属IP的UDP转发?我用你的一键安装后,只有主IP有UDP转发功能,其他IP都没有.
    绰号妖刀5年前(2019-02-25)回复
  2. 装好了翻不出去是什么鬼,脚本有问题了吧
    GG5年前(2019-02-21)回复
  3. 我想知道原版ss打开tcp fast open是不是会增加被识别的风险?好像有这方面的讨论?
    abccc5年前(2019-02-21)回复
  4. 安装 libev 版本报错:[Error] Failed to install libc-ares-dev
    dozyx5年前(2019-02-18)回复
  5. auth_chain_f 不能用。改为其他的可以
    leo5年前(2019-02-18)回复
  6. fastopen和timeout也可以在安装的时候提供输入,比如我的机子开启fastopen就容易掉线
    sasayaku5年前(2019-02-15)回复
  7. 我也遇到了类似的问题,之前都能访问,最近几天一直无妨访问,请问是啥原因呢?
    Ryan5年前(2019-02-11)回复
  8. 楼主,从昨天开始上班起,一直连不上Google,网页报错“500 Internal Privoxy Error”请问是什么原因呢,网上查了半天也没有靠谱的方法,请帮忙看看,谢谢
    galen5年前(2019-02-11)回复
    • 我也遇到类似的问题,最近几天一直用不了。你找到解决方案了吗?
      Ryan5年前(2019-02-11)回复
    • 我也遇到了类似的问题,之前都能访问,最近几天一直无妨访问,请问是啥原因呢?
      Ryan5年前(2019-02-11)回复
    • 有可能是客户端出问题了 我也遇到过这个问题 我把shadowsocks客户端重装下好了 不过重装之前最好先检测下ip和端口是否被封
      jiufen5年前(2019-02-16)回复
    • 同楼上的问题,运行了一年多的ss现在连不上,500 Internal Privoxy Error。手机和电脑都不行。还好蓝灯能用才跑来这里提问……
      瑞卡5年前(2019-03-12)回复
    • 用了近一年的腾讯云配lamp一键脚本和ss一键脚本,非常感谢作者。4合一脚本只装了Python版。今天突然发现ss服务器连不上,tcping端口发现超时不通,但是服务器本地看端口正常,重新运行脚本还是不工作。于是决定卸载重装新版,结果运行脚本时一直卡在安装libev-devel上,4个版本都是这样装不上了。 [Info] Starting to install package gettext-devel [Info] Starting to install package libev-devel [Error] Failed to install libev-devel Please visit: https://teddysun.com/486.html and contact. 请问下作者如何正常安装?或者是否有跳过这个包的可能性?
      瑞卡5年前(2019-03-12)回复
  9. Hi~新年好博主,我想问下,已经安装和部署了,上述的任一版本的SS服务,如果要更新到最新的版本,有没有更新命令,而不是完全重新装?比如2019年1月版本对更新到最新的两个模块,只需要更新这个模块即可?谢谢。
    比尔5年前(2019-02-08)回复
  10. Press any key to start...or Press Ctrl+C to cancel Hit:1 http://us.archive.ubuntu.com/ubuntu xenial InRelease Hit:2 http://us.archive.ubuntu.com/ubuntu xenial-updates InRelease Hit:3 http://us.archive.ubuntu.com/ubuntu xenial-backports InRelease Hit:4 http://security.ubuntu.com/ubuntu xenial-security InRelease Hit:5 https://deb.nodesource.com/node_10.x xenial InRelease Reading package lists... [Info] Starting to install package gettext [Error] Failed to install gettext Please visit: https://teddysun.com/486.html and contact. 这是怎么回事
    Yimn5年前(2019-02-08)回复
  11. checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking how to run the C preprocessor... /lib/cpp configure: error: in `/root/shadowsocks-libev-3.2.3': configure: error: C preprocessor "/lib/cpp" fails sanity check See `config.log' for more details [Error] Shadowsocks-libev install failed. Please visit: https://teddysun.com/486.html and contact. 不知道怎么回事。。
    loukky5年前(2019-02-06)回复
    • 我的也是这种情况,只要配置了多用户,就没法正常restart shadowsocks-python,我把多用户又配置成单用户后,又可以正常重启了,好奇怪啊!
      greatgeek5年前(2019-03-02)回复
  12. We need Vwray... please
    Torr5年前(2019-02-05)回复
  13. 请求支援V2ray-Plugin,Simple-Obfs已经无效
    hmac5年前(2019-02-02)回复
    • 你好 请问能加v2ray插件吗 谢谢你
      hh5年前(2019-03-17)回复
  14. python 支持一下吧~~~ 不会php
    NyneoJ5年前(2019-01-30)回复
  15. 不知为何 新版脚本安装shadowsocks-libev之后 链接经常出现connect closed by peer。python版本正常,为什么会出现这个错误呢?不过一般出现这个问题之后过十几秒到一分钟他会自己解决。
    zhicheng29145年前(2019-01-28)回复
    • 遇到同样的问题,一般链接Google系的网站,比如YouTube,Google Map就会很快,如果是非Google系的网站,就会慢,经常几十秒后才打开。或者打不开后刷新几次就又打开了。 后来我换了一个Shadowsocks-Libev的版本(直接从GitHub的Repository 安装的)。简单配置了一下,问题好像就解决了。
      Holyjolly5年前(2019-02-14)回复