Shadowsocks 一键安装脚本(四合一)

技术 秋水逸冰 3400198浏览 1374评论

本脚本适用环境

系统支持:CentOS 6+,Debian 7+,Ubuntu 12+
内存要求:≥128M
日期  :2019 年 01 月 11 日

关于本脚本

1、一键安装 Shadowsocks-Python, ShadowsocksR, Shadowsocks-Go, Shadowsocks-libev 版(四选一)服务端;
2、各版本的启动脚本及配置文件名不再重合;
3、每次运行可安装一种版本;
4、支持以多次运行来安装多个版本,且各个版本可以共存(注意端口号需设成不同);
5、若已安装多个版本,则卸载时也需多次运行(每次卸载一种);

友情提示:如果你有问题,请先阅读这篇《Shadowsocks Troubleshooting》之后再询问。

默认配置

服务器端口:自己设定(如不设定,默认从 9000-19999 之间随机生成)
密码:自己设定(如不设定,默认为 teddysun.com)
加密方式:自己设定(如不设定,Python 和 libev 版默认为 aes-256-gcm,R 和 Go 版默认为 aes-256-cfb)
协议(protocol):自己设定(如不设定,默认为 origin)(仅限 ShadowsocksR 版)
混淆(obfs):自己设定(如不设定,默认为 plain)(仅限 ShadowsocksR 版)
备注:脚本默认创建单用户配置文件,如需配置多用户,请手动修改相应的配置文件后重启即可。

客户端下载

常规版 Windows 客户端
https://github.com/shadowsocks/shadowsocks-windows/releases

ShadowsocksR 版 Windows 客户端
https://github.com/shadowsocksrr/shadowsocksr-csharp/releases

使用方法

使用root用户登录,运行以下命令:

wget --no-check-certificate -O shadowsocks-all.sh https://raw.githubusercontent.com/teddysun/shadowsocks_install/master/shadowsocks-all.sh
chmod +x shadowsocks-all.sh
./shadowsocks-all.sh 2>&1 | tee shadowsocks-all.log

安装完成后,脚本提示如下

Congratulations, your_shadowsocks_version install completed!
Your Server IP        :your_server_ip
Your Server Port      :your_server_port
Your Password         :your_password
Your Encryption Method:your_encryption_method

Your QR Code: (For Shadowsocks Windows, OSX, Android and iOS clients)
 ss://your_encryption_method:your_password@your_server_ip:your_server_port
Your QR Code has been saved as a PNG file path:
 your_path.png

Welcome to visit:https://teddysun.com/486.html
Enjoy it!

卸载方法

若已安装多个版本,则卸载时也需多次运行(每次卸载一种)

使用root用户登录,运行以下命令:

./shadowsocks-all.sh uninstall

启动脚本

启动脚本后面的参数含义,从左至右依次为:启动,停止,重启,查看状态。

Shadowsocks-Python 版:
/etc/init.d/shadowsocks-python start | stop | restart | status

ShadowsocksR 版:
/etc/init.d/shadowsocks-r start | stop | restart | status

Shadowsocks-Go 版:
/etc/init.d/shadowsocks-go start | stop | restart | status

Shadowsocks-libev 版:
/etc/init.d/shadowsocks-libev start | stop | restart | status

各版本默认配置文件

Shadowsocks-Python 版:
/etc/shadowsocks-python/config.json

ShadowsocksR 版:
/etc/shadowsocks-r/config.json

Shadowsocks-Go 版:
/etc/shadowsocks-go/config.json

Shadowsocks-libev 版:
/etc/shadowsocks-libev/config.json

更新日志

2019 年 01 月 11 日:
1、升级:libsodium 到最新版本 1.0.17;
2、升级:mbedtls 到最新版本 2.16.0;

2018 年 11 月 05 日:
1、升级:使用 Github 上最新代码编译出 Go 版二进制可执行文件,版本号 1.2.2。

2018 年 06 月 01 日:
1、修正:在启用了插件 simple-obfs 的情况下,libev 版启动失败的问题;
2、修正:在使用 /etc/init.d/shadowsocks-libev restart 命令重启 libev 版服务端时,偶尔出现的 “bind: Address already in use” 问题;
3、修正:移除 libev 版配置文件中的 local_address 字段;
4、修改:不再默认使用 root 用户启动,改为使用 nobody 用户启动 libev 版服务端 ss-server;
5、升级:mbedtls 到版本 2.9.0;
6、修改:libev 版启动脚本中的 -u 参数(即同时启用 TCP 和 UDP 模式),改到配置文件里配置为 “mode”: “tcp_and_udp”;
7、修改:libev 版配置文件的内置 NameServers 为 8.8.8.8,默认是从 /etc/resolv.conf 中取得。

2018 年 02 月 07 日:
1、修改:将默认端口从 8989 改为从 9000-19999 之间随机生成。

2018 年 02 月 06 日:
1、修改:ShadowsocksR 版为 ShadowsocksRR 最新版;
2、新增:ShadowsocksR 版的协议(protocol)增加了 4 个,分别为:

auth_chain_c
auth_chain_d
auth_chain_e
auth_chain_f

2017 年 12 月 29 日:
1、升级:libsodium 到 1.0.16。

2017 年 11 月 25 日:
1、如果 Linux 内核版本大于 3.7.0,则配置文件默认支持 TCP fast open;
2、新增:libev 版启动时支持 verbose mode,也就是默认写 log 到 /var/log/messages 方便查看。

2017 年 11 月 12 日:
1、新增生成 ss:// 或 ssr:// 链接,以及其二维码图片。
※ 脚本会根据当前安装的版本以及输入的各项配置,自动生成 ss:// 或 ssr:// 的链接并在安装成功后显示,直接复制即可被客户端识别。同时生成其二维码图片,并保存在当前目录下,下载后用看图软件打开,也能被客户端识别。

复制二维码链接后 Shadowsocks 客户端识别示例:

复制二维码链接后 ShadowsocksR 客户端识别示例:

二维码(QR Code)参考链接:
https://github.com/shadowsocks/shadowsocks/wiki/Generate-QR-Code-for-Android-or-iOS-Clients
https://github.com/shadowsocksr-backup/shadowsocks-rss/wiki/SSR-QRcode-scheme

2017 年 10 月 22 日:
1、升级:libsodium 到 1.0.15。

2017 年 10 月 14 日:
1、新增:在安装 Shadowsocks-libev 版时可选安装 simple-obfs 服务端。
※ 脚本通过判断 autoconf 版本是否大于或等于 2.67 来一键安装 simple-obfs 服务端。并且,支持在安装过程中选择 obfs 为 http 或 tls。
※ 使用方法参考:https://teddysun.com/511.html

2017 年 09 月 16 日:
1、修正:Shadowsocks-libev 版 v3.1.0 使用 libc-ares 替换 libudns 依赖包,解决了依赖问题;
2、升级:mbedtls 到版本 2.6.0。

2017 年 07 月 27 日:
1、新增:ShadowsocksR 版可选协议(protocol)auth_chain_b 。使用该协议需更新到最新(4.7.0) ShadowsocksR 版客户端
2、修改:更新 ShadowsocksR 源码下载地址。

2017 年 07 月 23 日:
1、修正:卸载时可自行选择某个版本卸载,若该版本不存在则报错退出。

2017 年 07 月 22 日:
1、修正:默认加密方式从 aes-256-cfb 改为 aes-256-gcm(Python 和 libev 版);
2、新增:安装时可选 16 种加密方式的其中之一(Python 和 libev 版)。如下所示:

aes-256-gcm
aes-192-gcm
aes-128-gcm
aes-256-ctr
aes-192-ctr
aes-128-ctr
aes-256-cfb
aes-192-cfb
aes-128-cfb
camellia-128-cfb
camellia-192-cfb
camellia-256-cfb
chacha20-ietf-poly1305
chacha20-ietf
chacha20
rc4-md5

3、新增:安装时可选 9 种加密方式的其中之一(Go 版)。如下所示:

aes-256-cfb
aes-192-cfb
aes-128-cfb
aes-256-ctr
aes-192-ctr
aes-128-ctr
chacha20-ietf
chacha20
rc4-md5

4、新增:安装时可选 15 种加密方式的其中之一(none 是不加密,ShadowsocksR 版)。如下所示:

none
aes-256-cfb
aes-192-cfb
aes-128-cfb
aes-256-cfb8
aes-192-cfb8
aes-128-cfb8
aes-256-ctr
aes-192-ctr
aes-128-ctr
chacha20-ietf
chacha20
salsa20
xchacha20
xsalsa20
rc4-md5

5、新增:安装时可选 7 种协议(protocol)的其中之一(仅限 ShadowsocksR 版)。如下所示:

origin
verify_deflate
auth_sha1_v4
auth_sha1_v4_compatible
auth_aes128_md5
auth_aes128_sha1
auth_chain_a
auth_chain_b

6、新增:安装时可选 9 种混淆(obfs)的其中之一(仅限 ShadowsocksR 版)。如下所示:

plain
http_simple
http_simple_compatible
http_post
http_post_compatible
tls1.2_ticket_auth
tls1.2_ticket_auth_compatible
tls1.2_ticket_fastauth
tls1.2_ticket_fastauth_compatible

2017 年 02 月 24 日:
1、恢复: 通过 Github API 自动获取 Shadowsocks-libev 的最新 release 版本的功能(v3.0.3)。

2017 年 02 月 13 日:
1、升级: Shadowsocks-libev 版到版本 3.0.2;
2、升级: Shadowsocks-go 版到版本 1.2.1(基于 Github 最新代码,用 go 1.8 编译完成的 x86 和 x86_64 二进制文件);
3、修复:在 Debian 7 下默认没有 libudns-dev 依赖包的问题。

2017 年 02 月 12 日:
1、升级: Shadowsocks-libev 版到版本 3.0.1。

2017 年 01 月 27 日:
1、升级: Shadowsocks-go 版到版本 1.2.1 (仅适用于 x86_64 系统)

更多单版本 Shadowsocks 服务端一键安装脚本

Shadowsocks Python 版一键安装脚本(CentOS,Debian,Ubuntu)
ShadowsocksR 版一键安装脚本(CentOS,Debian,Ubuntu)
CentOS 下 Shadowsocks-libev 一键安装脚本
Debian 下 Shadowsocks-libev 一键安装脚本
Shadowsocks-go 一键安装脚本(CentOS,Debian,Ubuntu)

注意:以上单版本不可与该四合一版本混用。

转载请注明:秋水逸冰 » Shadowsocks 一键安装脚本(四合一)

发表我的评论
取消评论

请输入正确答案后提交评论 *超出时限。 请再次填写验证码。

表情

Hi,您需要填写昵称和邮箱!

  • 昵称 (必填)
  • 邮箱 (必填)
  • 网址

网友最新评论 (1374)

  1. libev版更新,脚本也要等更新了
    aowu7年前(2016-12-30)回复
    • libev 脚本默认是通过 API 取 Github 上真正 release 的版本号,而不是 Pre-release
      秋水逸冰7年前(2017-01-01)回复
      • 那只能静静等待了。 楼主辛苦,很感激您的工作
        aowu7年前(2017-01-08)回复
  2. make[2]: Nothing to be done for `install-exec-am'. /bin/mkdir -p '/usr/local/lib/pkgconfig' /usr/bin/install -c -m 644 libsodium.pc '/usr/local/lib/pkgconfig' make[2]: Leaving directory `/root/libsodium-1.0.11' make[1]: Leaving directory `/root/libsodium-1.0.11' mv: cannot stat `shadowsocks-manyuser/shadowsocks': No such file or directory ShadowsocksR install failed, please Email to Teddysun and contact
    1117年前(2016-12-28)回复
  3. ShadowsocksR news: 重要通知,仓库移动公告: ShadowsocksR-python服务端仓库地址发生变化,如需要git pull,请先执行修改远程地址操作: git remote set-url origin https://github.com/shadowsocksr/shadowsocksr 或直接使用新地址进行clone操作: git clone https://github.com/shadowsocksr/shadowsocksr.git 因为地址变动,现在所有的一键脚本均暂时失效
    路人甲7年前(2016-12-28)回复
  4. 你好,我按照您的配置,安装了在vulrt的服务器上,怎么用ss客户端就是访问不了gg?
    vinx7年前(2016-12-28)回复
  5. 请教:安装了您的一键SSR,请问如何升级更新?
    中国蚊子7年前(2016-12-26)回复
    • 先卸载再重新运行脚本安装就是最新版。 因为脚本每次都是取 Github 上最新版来安装。
      秋水逸冰7年前(2016-12-26)回复
  6. 四合一版 和 Shadowsocks R一键 同样是安装 ssr 怎么四合一版占用硬盘2.2G ssr一键却不到300M,两者的ssr有什么区别
    小林7年前(2016-12-24)回复
    • 没区别,为了整合,多安装了几个依赖包而已。
      秋水逸冰7年前(2016-12-24)回复
  7. 秋大你好,这种方法搭的支持UDP转发吗,因为我是为了挂路由器上玩游戏机用的
    DougKing7年前(2016-12-22)回复
    • 装 libev 版,默认是支持 udp 转发的。
      秋水逸冰7年前(2016-12-23)回复
  8. Connecting to github-cloud.s3.amazonaws.com (github-cloud.s3.amazonaws.com)|52.216.0.200|:443... failed: Connection timed out. Resolving github-cloud.s3.amazonaws.com (github-cloud.s3.amazonaws.com)... 54.231.114.187 Connecting to github-cloud.s3.amazonaws.com (github-cloud.s3.amazonaws.com)|54.231.114.187|:443... failed: Connection timed out. Giving up. Download libsodium-1.0.11.tar.gz failed. 试了好几次都连不上- -
    bowen6287年前(2016-12-19)回复
    • Github 把资源都放在 AWS S3 上,如果你的 VPS 无法连接,那我也没什么好办法(逃
      秋水逸冰7年前(2016-12-20)回复
  9. 秋大你好, 我按照教程安装了Shadowsocks-Python,在Android手机上通过Shadowsocks.apk连接成功,网页视频都能打开,速度也挺快的,看youtube不卡。但是如果下载文件的话,速度超级慢,google play商店中下载一个几M的应用要半个小时。这个是什么原因? 有配置的地方吗?
    shankemomo7年前(2016-12-13)回复
    • 你可能用了国内某下载加速器,它永远会找国内的下载服务器,关了就好。我遇到过一样的问题
      al7年前(2017-08-25)回复
  10. 安装的时候好多404 没按上貌似
    索伦7年前(2016-12-13)回复
  11. 秋大你好 请问这个能开启混淆模式吗??
    Developer7年前(2016-12-09)回复
    • 只有选择安装 ShadowsocksR 才能开启混淆模式。
      秋水逸冰7年前(2016-12-10)回复
  12. 你好,请问一下你的网站部署的cloudflare是收费的还是免费的?
    河对岸7年前(2016-12-09)回复
    • 免费版,收费版最低也是 $20/月,用不起
      秋水逸冰7年前(2016-12-10)回复
      • lamp配置ssl后访问https都到默认的站点,修改网站目录之后直接404,是什么问题啊
        河对岸7年前(2016-12-10)回复
  13. 秋大,我新换的ultravps 重装了几次SS,不管哪个版本手机都连接不上,显示SSL 握手失败。原来的VPS都没有问题,服务器上显示安装成功。请问是什么问题?
    chiron7年前(2016-12-09)回复
    • 建议你把 VPS 系统升级到最新版之后再看看。
      秋水逸冰7年前(2016-12-10)回复
      • 重装了5,6次。终于可以了,谢谢 秋大
        chiron7年前(2016-12-11)回复
  14. 习惯了来访,看到满屏的代码,依旧喜欢
    胡杨7年前(2016-12-09)回复
  15. 秋大你好,这个配置文件可以改成多用户版的配置文件吗?应该怎么改?
    KN7年前(2016-12-09)回复
    • 每一个版本都可以(除了libev比较麻烦之外)都可以通过修改各自的配置文件来达到开启多端口的目的。 至于如何修改配置文件,在各种的单版本的文章里都有描写。
      秋水逸冰7年前(2016-12-10)回复